View TGL2616-SM_8559775.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

datasheet: rev - 08-08-14 - 1 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator applications ? commercial and military radar ? satellite communications ? point to point radio ? electronic warfare ? general purpose product features functional block diagram ? frequency range: 10-20 ghz ? 5-bit digital attenuator ? attenuation range: 23.25 db ? attenuation step size (lsb): 0.75 db ? insertion loss (ref. state): 4.8 db ? rms amplitude error: < 0.6 db ? rms step error: < 0.3 db ? control voltage: 3.3-5.0 v ? positive logic ? package size: 4.0 x 4.0 x 1.45 mm 1 2 rf in 3 4 v ref 5 6 18 17 16 rf out 15 14 b4 13 7 8 b0 9 b1 10 b2 11 b3 12 24 23 22 21 20 19 5 bit 23.25 db digital step attenuator 25 general description pad configuration triquint?s TGL2616-SM is a 5-bit digital attenuator using tqpht15, triquint?s production 0.15um gaas phemt process. operating from 10 ? 20 ghz, the TGL2616-SM offers a low lsb of only 0.75 db and supports > 23 db of attenuation range with a low rm s step error of < 0.3 db. using standard, positive control voltages, offered in a 4x4mm air cavity qfn, and offering excellent broadband performance, the tgl2216-sm is ideal for supporting a variety of commercial and military applications. lead-free and rohs compliant. evaluation boards available on request. pad number symbol 1,2,4,6,7,12,13,15,17,18, 19,24,25 gnd 3 rf input 16 rf output 14 b4 (12 db bit) 11 b3 (6 db bit) 10 b2 (3 db bit) 9 b1 (1.5 db bit) 8 b0 (0.75 db bit) 5 v ref 20-23 n/c ordering information part eccn description TGL2616-SM ear99 10-20 ghz 5-bit digital attenuator
datasheet: rev - 08-08-14 - 2 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator absolute maximum ratings recommended operating conditions parameter value parameter value control voltage (v c ) 6 v reference voltage 1 3.3-5 v control current (i c ) 1 ma control voltage (logic l / h) 1 0 / 3.3-5 v input power (p in ) 35 dbm note: power dissipation (p diss ) 0.7 w 1. v ref v c operating channel temperature 150 c operation of this device outside the parameter rang es given above may cause permanent damage. these are stress ratings only, and functional operation of the devic e at these conditions is not implied. electrical specifications are measured at specified test conditions. specifications are not guaranteed over all recommended operating conditions. electrical specifications test conditions, unless otherwise noted: 25 c, v ref = 3.3 v, v c = 0 / 3.3 v. tested with dut on evb on page 9 parameter min typical max units frequency range 10 20 ghz lsb attenuation 0.75 db attenuation range 23.25 db reference state insertion loss 4.8 db input return loss > 8 db output return loss > 12 db iip3 (10 mhz spacing, p in /tone=10 dbm, 15 ghz) 1 > 36 dbm switching speed (90% to 10%) < 10 ns rms attenuation error < 0.7 db rms step error < 0.3 db max. attenuation error < 1.1 db 1 t ga2616 die performance.
datasheet: rev - 08-08-14 - 3 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator specifications thermal and reliability information parameter conditions value units thermal resistance ( jc ) (1) t base = 85c, v ref = 3.3 v, v c = 3.3 v, p diss = 0.09 w 22 oc/w channel temperature (t ch ) (1) 87 c median lifetime (t m ) 3.8e+09 hrs note: 1. package base backside temperature fixed at 85 c . median lifetime test conditions: 6.0 v; failure criterion = 10% red uction in i d max 1.e+03 1.e+04 1.e+05 1.e+06 1.e+07 1.e+08 1.e+09 1.e+10 1.e+11 1.e+12 1.e+13 1.e+14 1.e+15 25 50 75 100 125 150 175 200 median lifetime, t m (hours) channel temperature, t ch (c) median lifetime vs. channel temperature fet5
datasheet: rev - 08-08-14 - 4 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator typical performance test conditions unless otherwise noted: tested with dut on evb on page 9. -35 -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 s21 (db) frequency (ghz) s21 vs. frequency vs. state v c = 5.0 v, t = 25 c state 0 state 31 -6.0 -5.5 -5.0 -4.5 -4.0 -3.5 -3.0 8 10 12 14 16 18 20 22 s21 (db) frequency (ghz) s21 vs. frequency vs. v c state 0, 3.3v state 0, 5.0v temp = 25 c data taken from tgl2616 die -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 s11 (db) frequency (ghz) s11 vs. frequency vs. state v c = 5.0 v, t = 25 c -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 s11 (db) frequency (ghz) s11 vs. frequency vs. v c state 0, 3.3v state 0, 5.0v temp = 25 c data taken from tgl2616 die -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 s22 (db) frequency (ghz) s22 vs. frequency vs. state v c = 5.0 v, t = 25 c -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 s22 (db) frequency (ghz) s22 vs. frequency vs. v c state 0, 3.3v state 0, 5.0v temp = 25 c data taken from tgl2616 die
datasheet: rev - 08-08-14 - 5 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator typical performance test conditions unless otherwise noted: tested with dut on evb on page 9. -8.0 -7.0 -6.0 -5.0 -4.0 -3.0 8 10 12 14 16 18 20 22 s21 (db) frequency (ghz) s21 vs. freq. vs. temp., state 0 - 40 c +25 c +85 c v c = 5.0 v -30 -29 -28 -27 -26 -25 8 10 12 14 16 18 20 22 s21 (db) frequency (ghz) s21 vs. freq. vs. temp., state 31 - 40 c +25 c +85 c v c = 5.0 v -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 s11 (db) frequency (ghz) s11 vs. freq. vs. temp., state 0 - 40 c +25 c +85 c v c = 5.0 v -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 s11 (db) frequency (ghz) s11 vs. freq. vs. temp., state 31 - 40 c +25 c +85 c v c = 5.0 v -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 s22 (db) frequency (ghz) s22 vs. freq. vs. temp., state 0 - 40 c +25 c +85 c v c = 5.0 v -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 s22 (db) frequency (ghz) s22 vs. freq. vs. temp., state 31 - 40 c +25 c +85 c v c = 5.0 v
datasheet: rev - 08-08-14 - 6 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator typical performance test conditions unless otherwise noted: tested with dut on evb on page 9. -35 -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 s21 (db) frequency (ghz) s21 vs. frequency vs. state ref state state 1 state 2 state 4 state 8 state 16 state 31 v c = 5.0 v, t=25 c -35 -30 -25 -20 -15 -10 -5 0 8 10 12 14 16 18 20 22 normalized s21 (db) frequency (ghz) normalized s21 vs. freq. vs. state ref. state state 1 state 2 state 4 state 8 state 16 state 31 v c = 5.0 v, t=25 c -10 0 10 20 30 40 50 60 8 10 12 14 16 18 20 22 relative s21 phase (deg.) frequency (ghz) relative s21 phase vs. freq. vs. state s1 s2 s4 s8 s16 s31 v c = 5.0 v, t = 25 c -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 0 3 6 9 12 15 18 21 24 27 30 attenuation error (db) attenuation state attenuation error vs. state 10 ghz 15 ghz 20 ghz v c = 5.0 v, t = 25 c 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 8 10 12 14 16 18 20 22 rms ampl. error (db) frequency (ghz) rms ampl. error vs. frequency vs. temp. - 40 c +25 c +85 c v c = 5.0 v, all states 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 8 10 12 14 16 18 20 22 rms step error (db) frequency (ghz) rms step error vs. frequency vs. temp. - 40 c +25 c +85 c v c = 5.0 v, all states
datasheet: rev - 08-08-14 - 7 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator typical performance test conditions unless otherwise noted: tested with dut on evb on page 9. gain, iip3 plots are from t he tga2616 die. 0.0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 8 10 12 14 16 18 20 22 max. ampl. error (db) frequency (ghz) max. ampl. error vs. frequency vs. temp. - 50 c +25 c +85 c v c = 5.0 v, all states 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 8 10 12 14 16 18 20 22 ampl. error (db) frequency (ghz) ampl. error vs. frequency vs. state state 1 state 2 state 4 state 8 state 16 state 31 v c = 5.0 v, t=25 c -30 -25 -20 -15 -10 -5 0 15 17 19 21 23 25 27 gain (db) input power (dbm) gain vs. input power vs. state s0 s1 s2 s4 s8 s16 s31 freq. = 15 ghz, v c = 3.3 v, temp = 25 c 35 40 45 50 10 11 12 13 14 15 16 17 18 19 20 iip3 (dbm) frequency (ghz) iip3 vs. frequency vs. temperature +25c +85c v c = 3.3 v, p in /tone = 10 dbm, 10 mhz spacing, state 0 30 35 40 45 50 55 0 3 6 9 12 15 18 21 24 27 30 iip3 (dbm) attenuation state iip3 vs. state vs. temperature +25c +85c v c = 3.3 v, p in /tone = 10 dbm, 10 mhz spacing, freq. = 15 ghz major states only
datasheet: rev - 08-08-14 - 8 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator application circuit 1 2 rf in 3 4 v ref 5 6 18 17 16 rf out 15 14 b4 13 7 8 b0 9 b1 10 b2 11 b3 12 24 23 22 21 20 19 5 bit 23.25 db digital step attenuator 25 function table ? major states parameter state b0 b1 b2 b3 b4 0 db attenuation (ref. state) state 0 l l l l l 0.75 db attenuation state 1 h l l l l 1.5 db attenuation state 2 l h l l l 3.0 db attenuation state 4 l l h l l 6.0 db attenuation state 8 l l l h l 12.0 db attenuation state 16 l l l l h 23.25 db attenuation state 31 h h h h h intermediate attenuation states are combinations of the above major states. logic l = 0v. logic h = 3.3-5.0 v
datasheet: rev - 08-08-14 - 9 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator applications information evaluation board layout rf layer is 0.008? thick rogers corp. ro4003c, r = 3.38. metal layers are 0.5 oz. copper. the microstrip line at the connector interface is optimized for the southwest microwave end launch connector 1092-02a-5. the pad pattern shown has been developed and tested for optimized assembly at triquint semiconductor. the pcb land pattern has been developed to accommodate lead and package tolerances. since surface mount processes vary from company to company, careful process development is recommended. r1 c1 r2 c2 bill of materials ref. designation value description mfg. part number r1, r2 180 ohms resistor, 0402 case various c1, c2 0.5 pf cap., 50v, 0.1 pf, c0g, 0402 case murata gjm1555c1hr50bb01
datasheet: rev - 08-08-14 - 10 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator mounting detail note: multiple vias should be employed under package cent er paddle to minimize inductance and thermal resist ance.
datasheet: rev - 08-08-14 - 11 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator mechanical information 2616 yyww mxxx 5.00 5.00 1.45 .30 3.40 sq 32x .25 .50 typ. (.100) (.305) 18x .457 dimensions are in mm. the TGL2616-SM will be marked with the ?yyww? and ? mxxx? designators and a lot code marked below the p art designator. the ?yy? represents the last two digits of the year the part was manufactured, the ?ww? is the work week, and the ?mxxx? is an auto-generated number. this package is lead-free/rohs-compliant. this pack age is compatible with both lead free and tin-lead soldering processes. dimensions are in millimeters.
datasheet: rev - 08-08-14 - 12 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator pad description 1 23 4 56 18 17 16 15 14 13 24 23 22 21 20 19 25 7 8 9 10 11 12 bottom view of package base pin number label description 3 rf input rf input 16 rf output rf output 14 b4 (12 db bit) control line for bit 4 11 b3 (6 db bit) control line for bit 3 10 b2 (3 db bit) control line for bit 2 9 b1 (1.5 db bit) control line for bit 1 8 b0 (0.75 db bit) control line for bit 0 5 v ref reference voltage 1,2,4,6,7,12,13,15,17, 18,19,24,25 gnd ground. on pcb, multiple vias should be employed un der 25 (center pad) to minimize inductance and thermal res istance. 20-23 no connection
datasheet: rev - 08-08-14 - 13 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator recommended soldering temperature profile
datasheet: rev - 08-08-14 - 14 of 14 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com TGL2616-SM 10-20 ghz 5-bit attenuator product compliance information esd sensitivity ratings caution! esd-sensitive device esd rating: tbd value: tbd test: human body model (hbm) standard: jedec standard jesd22-a114 solderability compatible with the latest version of j-std- 020 lead free solder, 260 c. eccn us department of commerce: ear99 rohs-compliance this part is compliant with eu 2002/95/ec rohs dire ctive (restrictions on the use of certain hazardous subst ances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c15h12br402) free ? pfos free ? svhc free contact information for the latest specifications, additional product i nformation, w orldwide sales and distribution locations, and info rmation about triquint: web: www.triquint.com tel: +1.972.994.8465 email: info-sales@tqs.com fax: +1.972.994.8504 for technical questions and application information : email: info-products@tqs.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regardin g the information contained herein. triquint assumes no responsibility or liability wha tsoever for any of the information contained herein. triquint assumes no responsibility or liab ility whatsoever for the use of the information con tained herein. the i nformation contained herein is provided "as is, whe re is" and with all faults, and the entire risk ass ociated with such information is entirely with the user. all information contained herein is subject to chan ge without notice. customers should obtain a nd verify the latest relevant information before pl acing orders for triquint products. the information contained herein or any use of such inf ormation does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intelle ctual property rights, whether with regard to such information itself or anything described by such information. triquint products are not warranted or authorized f or use as critical components in medical, life-savi ng, or life- sustaining applications, or other applications wher e a failure would reasonably be expected to cause s evere personal injury or death.

▲Up To Search▲

Price & Availability of TGL2616-SM

	To Download TGL2616-SM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .